When a town wants a road bridge over a rail line, a crossing closed and its traffic moved to a nearby street, or new gates and lights at a crossing, the question that follows is who pays. Two federal programs answer much of it. One is Section 130 of the federal highway law, which gives every State a share of highway funds each year for work at crossings. The other is the Railroad Crossing Elimination Program, a competitive grant program run by the Federal Railroad Administration. This note explains what each one funds, who takes part and how a project gets started. It gives no amounts, and it does not rank projects or places.
Two programs that work in different ways
The two programs differ in the way their funds travel.
- Section 130 is a formula program. Each State receives its share every year and chooses the projects itself from a survey and a schedule it keeps. Nobody outside the State applies to Washington for it.
- The Railroad Crossing Elimination Program is competitive. The FRA announces a round, eligible public bodies apply with a project, and the FRA selects among the applications.
The sections below take the programs one at a time and then set them side by side.
What Section 130 pays for
The program is set out in 23 U.S.C. 130, and the Federal Highway Administration describes it on its Railway-Highway Crossing Program overview, last updated 12 February 2025. The law covers the cost of projects that remove problems at crossings. It names several kinds:
- separating the road and the railroad, so one passes over or under the other;
- rebuilding existing crossing structures;
- moving a highway so that a crossing is no longer needed;
- projects at crossings that are often blocked by idling trains;
- moving the railway itself, where that costs less than the work at the crossings it would replace.
The set-aside also pays for installing warning devices, such as gates and flashing lights, at crossings. The law asks each State to have, at the very least, signs at all its crossings. A part of the funds may go to projects that reduce trespassing on the tracks near crossings, and the law asks that the needs of people on bicycles be considered in the projects.
Two smaller uses are worth knowing. A State may spend up to 8 percent of its funds on gathering and studying the data for its yearly report. And a State that has met all its needs for warning devices at crossings may use the rest for other road projects under the wider federal highway program the funds come from.
Section 130 also has a provision aimed squarely at closures. A State may make an incentive payment to a local government that permanently closes a public crossing at track level, but only if the railroad also makes a payment. The local government must spend the money on transportation improvements. The law caps the State's share, and the cap is not repeated here.
The FHWA overview adds that these funds are for public crossings, and that the federal share of a project's cost is 100 percent under section 130(f). The railroad may still pay part: where a project brings the railroad a net benefit, the law sets the railroad's share at that benefit, up to 10 percent of the cost.
Who decides on a Section 130 project
The choice belongs to the State. Under the law, each State keeps a survey of all its highways to find the crossings that may need separation, relocation or warning devices, and a schedule of projects to carry that work out. Section 130 projects come from that schedule.
The funds are a yearly set-aside from federal-aid highway funds. Half is shared among the States by an older formula, and half by each State's share of the country's public crossings, with no State receiving less than one-half of 1 percent. The FHWA overview notes that the set-aside was continued by the Infrastructure Investment and Jobs Act and that the program is governed in detail by 23 CFR Part 924.
The law also makes the States report back. By August 31 each year, each State reports to the FHWA on the progress of its projects and how well they work. The law also lets Section 130 funds be combined with local funds on a matching basis.
For a city, a county or a group of residents, this means the first conversation about a Section 130 project is with the State's department of transportation, which keeps the survey and the schedule. The railroad that operates through the crossing takes part as well, since the work is on or next to its track.
What the Railroad Crossing Elimination Program pays for
The grant program is set out in 49 U.S.C. 22909. The FRA's page for the Railroad Crossing Elimination grant program, last updated 30 October 2026, says it was created by section 22305 of the Infrastructure Investment and Jobs Act, and lists its funding rounds so far: fiscal year 2022, fiscal years 2023 and 2024, and fiscal years 2025 and 2026.
The law states the program's goals: to remove crossings that trains often block, to improve the health of the communities around crossings, to reduce the effect of freight movement on underserved communities, and to improve the mobility of people and goods. The kinds of projects it can fund are:
- separating the road and the railroad, or closing a crossing, including with a bridge, an embankment or a tunnel;
- moving the track;
- warning devices, signals and signs, but only as part of a separation or track relocation project;
- other ways of solving the problem at a crossing, including technology;
- groups of related projects;
- planning, environmental review and design for any of these.
The law also allows the purchase of land needed for a project. Because planning and design are eligible on their own, a community can ask for help with the early work of a separation before it has a finished design to build.
Who can apply for a Railroad Crossing Elimination grant
The law lists who may receive a grant:
- a State, including the District of Columbia, Puerto Rico and the territories;
- a political subdivision of a State;
- a federally recognized Indian Tribe;
- a unit of local government, or a group of them;
- a public port authority;
- a metropolitan planning organization;
- a group of any of these.
Railroads are not on the list, but they are part of every project. Before construction, an applicant must have the approval of the rail carriers and property owners the project affects. Planning projects do not need those approvals in advance if the applicant works with the railroads.
The law names the matters the FRA weighs when it selects projects. In no particular order: whether a project separates or closes crossings; its effect on mobility; its effect on emissions, noise and the community; access for emergency services; economic benefits; and access to communities that the rail line divides. The FRA also considers whether a project appears in a State rail plan, a State freight plan or a State crossing action plan, and whether the railroad supports it with funds. The law reserves at least 20 percent of the program for projects in rural areas.
The two programs side by side
| Question | Section 130 | Railroad Crossing Elimination Program |
|---|---|---|
| How funds are given | By formula, to every State each year | By competitive grant, in rounds |
| Who chooses projects | The State, from its survey and schedule | The FRA, from applications |
| Who receives funds | The State, which carries out projects | States, local governments, Tribes, port authorities, planning organizations and groups of them |
| Main kinds of work | Warning devices and signs at public crossings, separations, relocations, closure payments | Separations, closures and track relocation, plus planning and design |
| Role of the railroad | May pay a share where it benefits, up to 10 percent | Must approve before construction; its funding support is considered |
Where the crossing inventory comes in
Section 130 ties its work to the same records that Rail Crossing Atlas maps: the law requires each State to report its public crossing data to the federal inventory and to update it on or before September 30 each year. The State's survey of crossings and the inventory describe the same places.
Whatever the program, the inventory number is the one identifier that the State, the city, the railroad and the FRA all share for a crossing. The note on what a DOT crossing number is, and how to find one explains where to find it. With the number, anyone can read the record a project starts from: the type of crossing, its warning devices, its train and road counts, and the year of each count. The note on warning devices in the U.S. crossing inventory explains the device fields.
When the work is done, the record changes. A closure and, at public crossings, a change in warning device are among the changes that must reach the inventory within three months under 49 CFR 234.411. After a separation, the crossing is no longer at track level: in the FRA dataset, data updated 12 November 2026, queried 13 November 2026, the inventory holds 18,241 open records where the railroad passes over the road and 21,372 where it passes under, alongside 203,162 open crossings at track level. The note on closed and grade-separated railroad crossings shows how such records are kept and how closures have changed over the decades.
Where a resident or planner can start
Neither program asks a resident to apply. But anyone can follow a crossing through them, and a few steps make that easier.
- Find the crossing's record. Look up its number and read its type, devices and counts. Rail Crossing Atlas shows each record on a map, and its guide to the FRA crossing inventory explains where the data comes from.
- Ask the State about its schedule. The State department of transportation keeps the Section 130 survey and schedule, and can say whether a crossing is on it.
- Read the State's plans. A State rail plan, freight plan or crossing action plan is considered in grant selection, so it helps to know whether a project is named in one.
- Talk to the city, county or planning organization. They are the bodies that can apply for a Railroad Crossing Elimination grant, alone or together.
- Check the FRA page for the current round. The FRA publishes each round's notice of funding opportunity on its program page.
If the question behind a project is train horns rather than the crossing itself, the separate process is described in the note on how a U.S. city sets up a railroad quiet zone, and Rail Crossing Atlas lists the quiet zones by state.
Sources
Figures are as the source showed them on the date given. Rail Crossing Atlas figures come from the FRA crossing inventory of the date stated in the text.
- 23 U.S.C. 130: railway-highway crossings (Cornell Legal Information Institute). Read 13 November 2026.
- FHWA: Railway-Highway Crossing Program overview. Read 13 November 2026.
- 49 U.S.C. 22909: the Railroad Crossing Elimination grant program (Cornell Legal Information Institute). Read 13 November 2026.
- FRA: Railroad Crossing Elimination grant program page. Read 13 November 2026.
- 49 CFR 234.411: changes that must be reported within three months (Cornell Legal Information Institute). Read 13 November 2026.
- Rail Crossing Atlas guide: the FRA crossing inventory explained. Read 13 November 2026.
- Rail Crossing Atlas: quiet zones by state. Read 13 November 2026.