Every railroad crossing in the federal inventory has a number of its own. It is printed on a blue sign at many crossings, it heads every record in the inventory, and it is the one detail that a resident, a city engineer, a state agency and a railroad can all use to mean exactly the same crossing. This note explains what the number is, what it looks like, who assigns it, where to find it, and what you can do once you have it.
The figures in this note come from the FRA dataset, data updated 12 November 2026, queried 13 November 2026. They are drawn differently from the site-wide count of 203,136 open crossings at track level in the inventory of 3 November 2026, so the totals differ slightly.
What the number is
The federal rules on crossing inventory reporting call it the Inventory Number. The definitions in 49 CFR 234.401 describe it as the number assigned to a highway-rail crossing or pathway crossing in the Crossing Inventory. People also call it the DOT crossing number, the crossing ID or the inventory number. On the U.S. DOT Crossing Inventory Form it is Box D, in the header, and the column descriptions of the FRA dataset on data.transportation.gov call it the crossing ID. In the header, the number sits beside the revision date (Box A) and the reporting agency, so the first lines of a record already say which crossing it is, when its record was last revised and who filed it.
The number is the key to the record. Each later report about the crossing, from a new count of trains to a change of warning equipment to a closure, is filed against it. The first note in this series, how the U.S. railroad crossing inventory is kept, describes those reports and their deadlines.
The number belongs to the crossing, not to the road or the railroad. A road that meets railroad lines at three places has three numbers. And because the inventory also holds bridges and underpasses, a crossing on two levels has a number too: in the same reading of the dataset, 18,241 open records are for places where the railroad passes over the road and 21,372 where it passes under.
What the number looks like
Across the 203,162 records for open crossings at track level, every number has the same form: six digits followed by one capital letter. A typical example is 920798C. There are no spaces, dashes or extra characters in the dataset's version of the number.
Two details about the letter are worth knowing, both observed in the data rather than taken from a rule:
- Only 22 letters are in use. The letters I, O, Q and Z do not appear in the final position of any number.
- The letter is part of the number. Two numbers with the same six digits and different letters are different crossings. When you copy a number, copy the letter too, and read a handwritten 5 and S, or 8 and B, with care.
The rules read for this note do not say what the letter stands for, so this note does not guess. For looking a crossing up, it is enough to know that the letter belongs to the number.
Who gives a crossing its number
A crossing gets its number from the railroad. Under 49 CFR 234.405, the primary operating railroad assigns an Inventory Number to each crossing it operates through that was not reported before, and gives that number to any other railroad that operates through the same crossing. So when several railroads use one crossing, they all refer to it by the one number. If you know of a crossing that has no record at all, that is the case this section covers: the railroad that operates through it is the one to report it and give it a number.
The same section deals with places where many tracks and roads meet in a small area: rail yards, passenger stations, and the grounds of private companies, ports and docks. There the railroad may assign one number or more than one to cover the crossings in that area. So inside a yard, one number can stand for more than a single point where road and track meet.
Numbers stay with their records. When a crossing closes, its record stays in the inventory with its number, marked closed. In the same reading, the dataset holds 182,980 records for closed crossings at track level alongside the open ones. The note on closed and grade-separated railroad crossings explains how those records are kept.
Where the number is posted at the crossing
At many crossings, the quickest way to find the number is to look for a small blue sign. The federal rules call it an Emergency Notification System sign, and 49 CFR 234.309 sets out what it must show:
- a toll-free telephone number for reaching the railroad;
- a short statement of what the number is for;
- the crossing's U.S. DOT National Crossing Inventory number.
The same section sets the sign's size and look. It must be at least 12 by 9 inches, retroreflective, with white text on a blue background; the inventory number may instead be shown in black on a white rectangle.
The inventory records whether the sign is there, in Box III.2.I, "ENS sign displayed". For the open crossings at track level (FRA dataset, data updated 12 November 2026, queried 13 November 2026):
- sign displayed: 165,534 records;
- no sign: 16,653;
- field blank: 20,975.
So about four in five records report a sign. A blank field does not mean there is no sign, only that the record does not say. If there is no sign at a crossing, or it has faded, the number can still be found in the other ways below.
Four ways to find a number
Which way is quickest depends on whether you are standing at the crossing or sitting at a desk.
- Read the blue sign at the crossing. Note the six digits and the letter, and the toll-free number above them. Take a photo if you can, so the letter is not misread later.
- Use the Rail Crossing Atlas map. The Atlas shows each crossing's record on a map. Its short guide on how to find a crossing's DOT number explains the steps, and the page of railroad crossings by state is a starting point for browsing.
- Search the FRA dataset. On data.transportation.gov, filter the dataset by state and city, then by street or road name, and read the crossing ID of the matching rows. If you already have a number, search for it whole, letter included; a few digits on their own can match many rows. Check the position and the closed field too, because a street can have a bridge, an open crossing and a long-closed crossing on the same stretch.
- Ask the railroad or the state. The railroad named on the record, or the state agency that reports crossings, can confirm the number for a crossing you describe by its location.
The FRA also publishes a guide to filling in the inventory form, on its page for the FRA Guide for Preparing U.S. DOT Crossing Inventory Forms. It is written for the people who file records, but it is the official reference for what each box on the form means.
What the number lets you do
With the number in hand, the whole record opens up. A few uses come up again and again.
- Read the record. The second note in this series, reading a crossing record, field by field, walks through what each part says: where the crossing is, what kind it is, which railroad operates through it, its signs and signals, and its road counts.
- Check the type. Whether the crossing is public or private decides who looks after the road and which deadlines apply. The note on public and private railroad crossings explains the test.
- Check the train counts and their year. The note on how train counts are reported, and why they can be old explains why the year of the count matters as much as the count.
- Follow its history. The Rail Crossing Atlas guide on reading a crossing record's history shows how to see what changed on a record over the years.
- See what changed this week. The Rail Crossing Atlas page of weekly changes to the crossing records shows how much moves in the federal file each week; in the week of 26 October 2026, 2,404 records changed.
- Be precise in writing. When you write to a city, a state agency, a railroad or an editor about a crossing, give the number with the street name. Street names repeat and change; the number does not.
- Report a problem. The blue sign puts the railroad's toll-free number next to the inventory number, so a caller can say exactly which crossing they mean. The note on who looks after a crossing, and how to reach them explains what happens after the call.
When a number needs a second look
The number is reliable, but a few cases need care.
A number written another way. If a plan, a letter or a study shows the number with a space or a dash in it, remove them before searching. On every open crossing at track level in the dataset, the number is seven characters, six digits and a letter, with nothing between them.
The same number twice. In this reading, the 203,162 open crossings at track level carry 203,156 distinct numbers: 6 numbers appear on two records each. That is a tiny share, but if a search returns two rows for one number, compare their locations and revision dates before choosing one, and treat the pair as a question for the reporting agency.
A number that seems to cover several places. In yards, stations and port or industrial areas, one number may stand for a group of crossings, as section 234.405 allows. A record there can describe a site rather than a single point.
A sign that does not match the record. If the number on a sign and the number on the map disagree, check the location fields of both records in the federal dataset, and use the toll-free number on the sign to tell the railroad.
A closed crossing with a familiar number. If a number from an old document leads to a record marked closed, the crossing has been closed, not lost. Closed records keep their numbers, so their history can still be read.
With those cases in mind, the number does its job well, for a single question about one crossing as much as for a study of a whole corridor. Six digits and a letter are enough to point every party at the same crossing, and to open its full record in the federal inventory.
Sources
Figures are as the source showed them on the date given. Rail Crossing Atlas figures come from the FRA crossing inventory of the date stated in the text.
- 49 CFR 234.401: definitions for crossing inventory reporting (Cornell Legal Information Institute). Read 13 November 2026.
- 49 CFR 234.405: initial data for previously unreported crossings (Cornell Legal Information Institute). Read 13 November 2026.
- 49 CFR 234.309: the sign with the railroad's toll-free number and the crossing's inventory number (Cornell Legal Information Institute). Read 13 November 2026.
- Crossing Inventory Data, Current: the FRA dataset and its column descriptions on data.transportation.gov. Read 13 November 2026.
- FRA Guide for Preparing U.S. DOT Crossing Inventory Forms (FRA page for the guide). Read 13 November 2026.
- Rail Crossing Atlas guide: find a crossing's DOT number. Read 13 November 2026.
- Rail Crossing Atlas: railroad crossings by state. Read 13 November 2026.
- Rail Crossing Atlas guide: reading a crossing record's history. Read 13 November 2026.
- Rail Crossing Atlas: weekly changes to the crossing records. Read 13 November 2026.